High-Temperature Resistant Fumei Dust Filter Bag - Anti-Static Dust Filter Bag

High-Temperature FMS Dust Removal Bag - Anti-Static Dust Filter Bag

Performance of PTFE Membrane Dust Removal Bag:

At the beginning of the bag's operation, a thin layer of dust with good air permeability forms on the membrane surface, achieving both high dust removal efficiency and low operating resistance. Moreover, as mentioned earlier, dust cleaning is also easy. The dust layer on the membrane-coated polyester needle-punched felt dust removal bag is easy to peel off; sometimes, dust falls off even before the cleaning mechanism activates. Another important fact is that even water-hardening dust, such as cement dust, is stripped off during the initial caking stage on the membrane surface. However, if dust caking is severe or flue gas condensation occurs, the membrane filter material is ineffective, and other measures must be taken to address the issue of high-temperature FMS dust removal bags - anti-static dust filter bags.

Technical Parameters of PTFE Membrane Dust Removal Bag:

1. Air Permeability: 2～5 m³/m²·min.

2. Dynamic Resistance: ≤180 Pa.

3. Filtration Efficiency: ≥99.999%.

4. Membrane Bonding Strength: ≥0.03 MPa.

5. Recommended Filtration Wind Speed: ≤1.5 m/min.

6. Operating Temperature: ≤120°C.

7. Suitable Dust Collector Type: Pulse.

8. Lamination Process: Hot Press Lamination.

9. Air Permeability: 16 m³/m²·min.

10. Warp Tensile Strength: >1100 N/5×20 cm.

11. Weft Tensile Strength: >1400 N/5×20 cm.

12. Warp Elongation: <25%.

After-Sales Service

1. Due to the variety of filter bag products and the numerous factors involved in technical parameters, the actual product may differ from the images, which are for reference only. The actual received product shall prevail, and the online listed price may differ from the actual price; please contact us for accurate information.

2. Shipping Cost Explanation: Shipping costs are borne by our company.

3. Actual Price: Due to market fluctuations, the actual price may vary; the specific price shall be determined through negotiation between both parties.

4. Transaction Method: Payment before shipment.

5. Delivery Cycle: Specific to the model. Due to the wide range of filter core models, the general production cycle for filter cores is 3-5 days, with the actual cycle determined by our company. High-Temperature FMS Dust Removal Bag - Anti-Static Dust Filter Bag